KH Buffer - Water hardness

KH BUFFER

Incorrect pH levels can cause stress in fish making them prone to disease.  pH should be monitored periodically to ensure correct levels are maintained.  Especially after water changes or periods of intense rain.  pH levels can become unstable when KH levels are out.  KH BUFFER stabilises the pH & KH levels of pond or aquarium water in a safe and easy manner.

Check out our stockists page to see where you can get this product.

ALWAYS MEASURE PH & KH WITH A QUALITY TEST KIT BEFORE EACH APPLICATION OF THIS PRODUCT.

IMPORTANT : NEVER ATTEMPT TO CHANGE THE PH OF POND OR AQUARIUM WATER BY MORE THAN 0.5 POINTS ON THE SCALE WITHIN 24 HOURS.  SUDDEN LARGE-SCALE CHANGES IN PH CAN CAUSE DEATH IN SOME FISH THROUGH SHOCK.

TREATS UP TO 20,000L

DIRECTIONS:

  1. Measure the current pH of the water you wish to buffer.
  2. Add 50g of PH DECREASER for every 1,000L of water
    ONE CAP EQUALS 20g
  3. After 5 minutes measure the pH level again with a test kit.
  4. Repeat if necessary, ensuring you do not cause pH shock by making large pH changes.

TIP:  If your water does not hold its pH level it may be because your KH levels are out.  Ideally your KH level should be between 70 and 140 ppm (parts per million) for most ponds and
aquariums.  Lower pH levels may require lower KH levels of 0 to 50 ppm.