Clorine Testing

    

Chlorine is deadly to fish and nitrifying bacteria.  Using a pool chlorine test kit will not give you the readings you need as they measure high levels of chlorine.  To ensure that all chlorine has been removed from your pond or aquarium water, the Rikka Cl2 chlorine test kit gives you easy accurate low range chlorine readings.

Check out our stockists page to see where you can get this product.

Test Cl2 - test for measuring unbound and total chlorine content in water. Can be used for all cases where knowing chlorine content in water is necessary.

INSTRUCTION:
1.Wash measuring vial few times with water that is to be tested.
2. Add 5ml of water that is to be tested to measuring vial.
3. Add 5 drops of reagent №1 and shake vigorously.
4. Add 5 drops of reagent №2 (unbound chlorine) and shake vigorously.
5. Wait 3 minutes and compare the colour with included colour scale.
6. Add 5 drops of reagent №3 (total chlorine).
7. Wait 3 minutes and compare the colour with included colour scale.

After measuring chlorine content, thoroughly wash the measuring vial.

In order to get accurate measurements, the temperature of water that is to be tested must be 25±3°С, and room temperature must not be below 20°С.

  • Storage life: 24 months, but no more than 12 months since opening.
  • Keep at 10-25°С in dry dark place! Keep out of reach of childrenі!
  • Avoid skin contact! Upon skin contact wash with large amounts of water!